• Compatible with TPO, EPDM, PVC and modified bitumen roofs
  • Permanent slip resistance
  • Protects roofing membranes from pedestrian traffic
  • Open grid and self draining
  • Stable in wind speeds up to  96km/h*
  • Recommended for wet & open to sky areas
Crossgrip TPO 2

Impermeable in all weathers, Crossgrip TPO (thermoplastic polyolefin) is highly specialised matting system for flat roofs, gantries and high level walkways, which provides continuous safe access to essential roof top services for maintenance. When laid flat, it will remain stable in winds up to 96 km/h*, however if wind speeds of over 60mph are probable, Plastex recommends securing the matting system by welding connecting loops into the vinyl membrane.

Crossgrip TPO is constructed from non-porous TPO in a unique design of special cross directional top ribs with an embossed surface to give permanent slip resistance and a surer underfoot grip in a wide range of high level applications.

PVC Grid: stable in wind speeds up to 150 km/h;
TPO Grid: stable in wind speeds up to 142km/h.

The effective combination of an open grid format and 12 mm above ground height enables self-draining and makes Crossgrip TPO at its most efficient wherever water collects or puddles may occur.

Once installed, Crossgrip TPO will only require minimal periodic maintenance, such as cleaning and visual inspection for damage or movement, and will remain effective for the life of the roof covering below. Compatible with TPO, EPDM, PVC and modified bitumen roofs, the product additionally gives continuous protection to roofing membranes from damaging weather, pedestrian traffic, tools and machinery.

Another major advantage is that Crossgrip TPO is quick and easy to install. The flexibility of the product ensures that it will contour to uneven surfaces or imperfections in the roof structure, which are common where new membrane systems are laid over old ones.

*Loose laid it is effective for winds up to 96 km/h. In Laboratory conditions on a flat surface at The University Of Hertforshire, School of Aerospace, Automotive & Design Engineering:

PRODUCT SIZES
CROSSGRIP TPO THICKNESS STD. ROLLS COLOURS
Crossgrip TPO 12 mm 0.75m x 10m White

Benefits of Crossgrip TPO

  • Certified slip resistance DIN 51130: R9
  • Excellent drainage DIN 51130: V10
  • Roof membrane protection
  • Compatible with TPO and EPDM roof membranes
  • Quick to install
  • Contours to the roof structure
  • Loose lay, no fixing required
  • Long life

Features of Crossgrip TPO

  • Embossed surface
  • Two layer construction
  • Made from flexible TPO
  • TPO construction
  • Supplied in 10m rolls
  • Made from flexible TPO
  • Stable in winds up to 55mph (89km/h)*
  • UV resistant

Product Document